Product Description
Feuling Reaper Chain Drive Race Series Camshaft Kit for Harley Davidson Milwaukee Eight
High performance camshaft kit by Feuling for Milwaukee Eight engines. Available in different configurations to suit your performance needs.
Complete camshaft kit with HP+ lifters available here
Reaper camshaft only available here
Features:
- Include camshaft, lifters and a cam installation kit that includes the cam bearing, cam/crank hardware
- Kit also includes gasket/O-ring kit that allows installation of Feuling Heavy-Duty HP+ 0,0165” wall one-piece pushrods or factory one-piece pushrods
- Include Race Series® hydraulic lifters
- Dyno proven and track tested
- See cam specific features below
465 Camshaft
- Produces solid bottom-end performance and substantial gains above 2800 rpm compared to the stock cams
- Direct bolt-in replacement for M-Eight engines; can be used with stock valve springs, pushrods, lifters and exhaust
- Will respond well when used with slip-on mufflers or a full exhaust system and a high-flow air cleaner
- Use of performance valve springs is not required but may result in a quieter, smoother-running valve train
- Responds well when combined with increased engine bore and/or engine compression
- 1850 - 5950 rpm range
- 465 Grind Camshaft Installation Instructions For Milwaukee Eight Engines
472 Camshaft
- Great all-around camshaft and Feulings go to for 4-1/2 stroke 114” - 117” engines looking for a little more than the 465 grind and wanting a bolt-in
- Has a great bottom end with substantial gains above 2800 rpm when compared to stock
- Use of performance valve springs is not required but may result in a quieter, smoother-running valve train, see B962-09262973 or B962-09262974
- Responds very well to increased bore and or compression, exhaust system and air cleaner
- 472 Grind Camshaft Installation Instructions For Milwaukee Eight Engines
508 Camshaft
- The Grim Reaper Aggressive pulling power with a nasty sound
- This camshaft revs up faster than the 521 grind, sounds nastier and pulls harder, but is more difficult to tune
- The Reaper 508 grind will shine in 114” and larger cubic inch engines with added compression ratio
- Ported cylinder heads are not required, but will complement the cam and add even more pulling power throughout the range
- The stock throttle body produces an excellent powerband and use of a high-flow throttle body will increase peak power numbers
- A high-flow exhaust system and air cleaner is highly recommended for optimal performance
- Feuling recommends matching 508 cam with Race Series oiling system B962-09320199
- Requires high lift valve springs; see B962-09262973 or B962-09262974
- Heavy-duty pushrods are highly recommended; see B962-09280091
- 2250 - 5900 rpm range
521 Camshaft
- Aggressive pulling power with a “nasty” sound, the Reaper 521 grind will shine in 114” and larger cubic inch engines with added compression ratio
- Ported cylinder heads are not required, but will complement the cam and add even more pulling power throughout the range
- Stock throttle body produces an excellent powerband; use of a high-flow throttle body may increase peak power numbers
- A high-flow exhaust system and air cleaner is highly recommended for optimal performance
- Feuling recommends matching 521 cam with Race Series oiling system B962-09320199
- Requires high lift valve springs, see B962-09262973 or B962-09262974
- Heavy-duty pushrods are highly recommended, see B962-09280091
- 2250 - 6250 rpm range
538 Camshaft
- Aggressive camshaft with a nasty sound
- Revs up fast and pulls hard in engines with big bore cylinders, modified cylinder heads, intake, compression and exhaust
- The Reaper 538 grind will shine in 124” and larger cubic inch engines with added compression ratio
- Ported cylinder heads are not required, but will complement the cam and add even more pulling power throughout the range
- The stock throttle body produces an excellent powerband and use of a high-flow throttle body will increase peak power numbers
- A high-flow exhaust system and air cleaner is highly recommended for optimal performance
- Feuling recommends matching 538 cam with Race Series oiling system B962-09320199
- High lift valve springs are required on stock cylinder heads, see Feuling Beehive valve spring kit B962-09262973 or B962-09262974
- Heavy-duty pushrods are highly recommended, see B962-09280091
- 2250 - 6250 rpm range
592 Camshaft
- Get serious with bore size, ported cylinder heads and throttle body
- Aggressive camshaft requiring high lift and higher load valve springs, performance pushrods and lifters
- High-flow air cleaner and triple-stepped exhaust pipe highly recommended
- Feuling also recommends matching this cam with Race Series oiling system B962-09320199 or B962-09320218
- Heavy-duty pushrods are highly recommended see B962-09280091
- High lift valve springs, performance pushrods and lifters required
- 2850 - 6250 rpm range
General product notes:
Note: Due to the unstable nature of this 4-valve engine design with one rocker arm activating two valve springs, Feuling highly recommends running one-piece pushrods (B962-09280091) over quick-install adjustable pushrods to maintain maximum cam/valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues.
Note: Feuling fastener kit B962-24010994 also highly recommended to help prevent cylinder head cracking, kit replaces the rocker shaft bolts with studs and nuts to help reduce the stress of the rocker shaft standoffs.
Camchest Installation Instructions For Milwaukee Eight Engines Available Here
Cam specs measured in the engine on the lifter @ 0,050” using a 1.61 rocker arm ratio
| GRIND | VALVE LIFT | OPEN | CLOSE | DURATION @ 0,053” | LIFT @ TDC | LOBE CENTERLINE |
| 405 | ||||||
| Intake | 0,395 | 4° | 24° | 200° | 0,068” | 103° |
| Exhaust | 0,405 | 36° | 11° | 205° | 0,049” | 108° |
| 465 | ||||||
| Intake | 0,445 | 4° | 23° | 207° | 0,100” | 99,5° |
| Exhaust | 0,465 | 50° | 6° | 236° | 0,100” | 112° |
| 472 | ||||||
| Intake | 0,468 | 8° | 25° | 213° | 0,117” | 98,5° |
| Exhaust | 0,472 | 50,7° | 7,75° | 238° | 0,110” | 111,5° |
| 508 | ||||||
| Intake | 0,508 | 20,5° | 37° | 237° | 0,180” | 98,5° |
| Exhaust | 0,511 | 44° | 17,5° | 241,5° | 0,146” | 103,25° |
| 521 | ||||||
| Intake | 0,518 | 17° | 34° | 231° | 0,162” | 98,5° |
| Exhaust | 0,521 | 51,5° | 11,5° | 243° | 0,125” | 110° |
| 538 | ||||||
| Intake | 0,538” | 20,5° | 38,5° | 239° | 0,180” | 99° |
| Exhaust | 0,542” | 48° | 18° | 246° | 0,157” | 105° |
| 592 | ||||||
| Intake | 0,578” | 20° | 34° | 234° | 0,182” | 97° |
| Exhaust | 0,592” | 68° | 16° | 264° | 0,146” | 116° |
Variant: 17-23 M8 - 465 Chain Drive Cam Kit
SKU: B962-09251177
MPN: 1453
DPN: 09251177
Variant: 17-23 M8 - 472 Chain Drive Cam Kit
SKU: B962-09251327
Variant: 17-23 M8 - 508 Chain Drive Cam Kit
SKU: B962-09290084
MPN: 1459
DPN: 09290084
Variant: 17-23 M8 - 521 Chain Drive Cam Kit
SKU: B962-09251211
Variant: 17-23 M8 - 538 Chain Drive Cam Kit
SKU: B962-09251374
MPN: 1461
DPN: 09251374
Variant: 17-23 M8 - 592 Chain Drive Cam Kit
SKU: B962-09251266
MPN: 1458
DPN: 09251266
Shipping and Delivery Times
All orders are shipped from our warehouse in Falkenberg, Sweden. We work hard to get them moving quickly!
Stock status explained:
- In stock: Ready to ship to you within the time listed. Packages usually arrive 2–4 business days after dispatch depending on your location.
- Sold Out: Currently out of stock at Customhoj, but we expect to have it back soon! Please feel free to contact us for information on when the product will be available again.
If a product has multiple variants (like sizes or colors), the stock status updates automatically as you select your option.
Our goal is simple, to get your order to you as fast as possible!
30-Day Hassle-Free Returns - No Questions Asked
If you are not entirely satisfied with your order, whether you need to change sizes or something else, we offer a full 30-day return policy from the day you receive your order. Return shipping costs apply.
Please note that the right to return does not apply to products that are personalized, or manufactured upon order. See our return policy for complete details and conditions.
You may also like
Biker favourites
