Description
REV'IT! Speedart H2O Motorcycle Gloves
A lot of research and development goes into engineering a piece of REV’IT! apparel, they take feedback from both customers and expert riders to assure they get it right. The all-new Speedart H2O had to be worthy of their name – the finest example of the art of balancing sporty motorsports style with premium, waterproof, summer performance; gloves capable of optimizing road-ready handlebar feedback, while delivering superior comfort and control while keeping you dry. And – spoiler alert – they really do.
Road-tested leathers
REV'IT! research, design, and test every stitch, panel, and textile to find the ideal motorcycle-specific properties. Like the freedom of movement afforded by lots of carefully positioned stretch. On the Speedart H2O’s palms, the strength of soft, water-resistant, drum-dyed goatskin leather gives the gloves maximum feel and handlebar feedback.
Ride the summer, no matter the weather
Riding at pace in summer calls for a clever balance of protection and wet weather-readiness, and so the Speedart H2O are carefully crafted to cosset your fingers and palms with a waterproof Hydratex Z-liner and malleable memory foam. Should you come to a sudden stop, your gloves need to be your safety net, which is where an additional cushioning layer of memory foam under the TPU hard-shell knuckle protectors comes in. Plus, there’s the added reassurance of TPU palm sliders, proven to prevent and reduce risk of injury.
Key benefits:
- Level 1 KP certified according to the CE EN 13594:2015 standard
- Technical, waterproof, sport riding glove
- Comfortable, short cuff design
- 100% waterproof Hydratex | Z-liner
Features
- Adjustability
- Adjustment tab at cuff
- Stretch at fingers
- Stretch at thumb
- Stretch fabric on back of hand
- Stretch lips at fingers
- Stretch lips at thumb
- Closure
- Hook-and-loop closure
- Features
- Conductive fingertip at index finger and thumb: Never take off your gloves again to answer your phone or navigation system. The connect fingertips has been specifically designed to operate touch screens.
- Grip patch at palm: A grip patch is made with a texturized pattern to deliver a superb grip performance.
- Pull tab: Fasten the pull tab at the cuff and cold wind is prevented from entering the sleeve, keeping your arms in the comfort zone
- Short cuff
- Stretch at cuff
- Suede leather visor wiper
- Lining
- Tri-fleece liner: This polyester tricot fabric is used for glove lining, and brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp.
- Outer shell material
- Automan stretch: Another type of stretch fabric, Automan is used to maintain protection while riding, but with a form-fitting and elastic silhouette that maximizes comfort.
- Connect finger tip fabric: Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
- Goatskin drum dyed with WR finish
- Hypalon pull tab at cuff
- PWR | Shell stretch
- Suede leather with WR finish
- Synthetic PU leather
- Protection
- Memory foam at cuff: Comfort and protection enhancing, viscoelastic foam that molds to the rider's wrist.
- Memory foam at fingers: Comfort and protection enhancing, viscoelastic foam that molds to the rider's fingers.
- Memory foam at palm: Comfort and protection enhancing, viscoelastic foam that molds to the rider's palm.
- Memory foam underneath knuckle protector: Comfort and protection enhancing, viscoelastic foam that molds to the rider's knuckles.
- TPU hard shell knuckle
- TPU hard shell palm slider: Palm slider made of a durable and high abrasion resistant TPU material at the palm side of the glove. The palm slider makes sure that the glove slides in case the palm of the hand comes in contact with the asphalt. The abrasion resistance of gloves equipped with these sliders is greatly increased, thus reducing the risk of injury significantly.
- Visibility
- Reflection at finger
- Reflective logo at cuff
- Waterproofing
- Hydratex | Z-liner: A waterproof layer is laminated onto a carrier to construct the REV’IT! Hydratex | Z-liner membrane. The carrier, in turn, protects the membrane against wear-and-tear damage, and the seams of the membrane are taped to ensure waterproofing. The Z- liner is constructed between the lining and the outer shell. The REV’IT! Hydratex | Z-liner membrane is used in garments that demand a high level of all-weather protection.
Shipping and Delivery Times:
We process all orders from our warehouse in Falkenberg, Sweden, ensuring prompt shipment. All packages are shipped with DHL.
Understanding Stock Information:
- In stock: In stock at Customhoj, it will ship to you within the time listed. For EU countries, delivery typically occurs within 2–5 business days after dispatch.
- Sold Out: Currently out of stock at Customhoj, but we expect to have it back soon! Please feel free to contact us for information on when the product will be available again.
When purchasing products with multiple variants, the stock status will be automatically updated as you select the specific variant you wish to buy.
Our commitment to timely shipping ensure that you receive your order as quickly as possible.
30-Day Return Policy - No Questions Asked:
If you are not entirely satisfied with your order, whether you need to change sizes or have other concerns, we offer a full 30-day return policy from the day you receive your order. Return shipping costs apply.
Please note that the right to return does not apply to products that are personalized, or manufactured upon order. See our return policy for complete details and conditions.
If you have any further questions or require assistance with your order, please don't hesitate to reach out to us!
If you have any questions about this product we are happy to answer them!
Reach out to us by phone, email or on Facebook below:
Phone: +46 (0) 920 224 878
Email: support@customhoj.com